C-Channels are standardized channel section. The hot rolled execution has conical flanges, while the laser fused has parallel ones. Both their tolerances are defined by ASTM A 484, the laser fused execution has additionally the product standard defined by ASTM A1069.
C-Channels in stainless steel are used in commerce and industry but also in machinery and equipment building. The use of stainless steel profiles is characterized by a high flexibility of composition and a fast and cost reduced construction (through the possibility of prefabrication in the steel production). Stainless steel profiles are produced mainly from scrap and can be recycled again after utilization so new resources can be conserved.
The following austenitic grades are predominantly used for stainless steel structurals: 304, 304L, 316, 316L, they are defined by ASTM A276, ASTM A479 and ASME SA479.
|C 50X25X5X6||Hot Rolled||3.95||50 mm||25 mm||5 mm||6 mm||6 mm||3 mm|
|C 75X40X5X7||Hot Rolled/Laser||6.95||75 mm||40 mm||5 mm||7 mm||8 mm||4 mm|
|C 100X50X5X7.5||Hot Rolled/Laser||9.37||100 mm||50 mm||5 mm||7.5 mm||8 mm||4 mm|
|C 125X65X6X8||Hot Rolled/Laser||13.40||125 mm||65 mm||6 mm||8 mm||8 mm||4 mm|
|C 150X75X6.5X10||Hot Rolled/Laser||18.62||150 mm||75 mm||6.5 mm||10 mm||10 mm||5 mm|
|C 150X75X9X12.5||Hot Rolled/Laser||24.01||150 mm||75 mm||9 mm||12.5 mm||5 mm||1 mm|
|C 180X75X7X10.5||Hot Rolled/Laser||21.52||180 mm||75 mm||7 mm||10. mm||2 mm||1 mm|
|C 200X80X7.5X11||Hot Rolled/Laser||24.77||200 mm||80 mm||7.5 mm||11 mm||2 mm||1 mm|
|C 200X90X8X13.5||Hot Rolled/Laser||30.53||200 mm||90 mm||8 mm||13.5 mm||2 mm||1 mm|
|C 230X80X8X12||Hot Rolled/Laser||28.56||230 mm||80 mm||8 mm||12 mm||2 mm||1 mm|
|C 250X90X9X13||Hot Rolled/Laser||34.86||250 mm||90 mm||9 mm||13 mm||2 mm||1 mm|
|C 250X90X11X14.5||Hot Rolled/Laser||40.34||250 mm||90 mm||11 mm||14.5 mm||2 mm||1 mm|
|C 300X90X9X12||Hot Rolled/Laser||37.17||300 mm||90 mm||9 mm||12 mm||2 mm||1 mm|
|C 300X90X10X15.5||Hot Rolled/Laser||43.85||300 mm||90 mm||10 mm||15.5 mm||2 mm||1 mm|
|C 300X90X12X16||Hot Rolled/Laser||48.78||300 mm||90 mm||12 mm||16 mm||2 mm||1 mm|
|C 380X100X10.5X16||Hot Rolled/Laser||54.85||380 mm||100 mm||10.5 mm||16 mm||2 mm||1 mm|
|C 380X100X13X16.5||Hot Rolled/Laser||62.50||380 mm||100 mm||13 mm||16.5 mm||2 mm||1 mm|
|C 380X100X13X20||Hot Rolled/Laser||67.37||380 mm||100 mm||13 mm||20 mm||2 mm||1 mm|